in the app i pressed the refresh circle and it updated the battery status and the keypad said disarmed. i looked at the log and it was syncing and updating. genes in the computerlike device in a 3 body could be adapted to ring. Okay, I was able to fix this by pressing the pinhole one time in the back and the white keypad light came on in the front. In fact, the concept of the Internet was a mind-boggler a mere five years ago. In the logs i see a warning “Unrecognized device.
also, in the app the battery icon has a dash below it. 7 Keypad 8 Contact Sensor 9 Motion Detector 10 Documents / Resources 10.1 References 11 Related Posts Before you begin Use this guide. Maintain pressure on the button until the LED turns red. The LED on the sensor’s front should begin to blink. though there is no response from the keypad or the app to the keypad. 1 Before you begin 2 eero Wifi Router 3 Download the Ring app 4 Base Station 5 Open the Ring app. Press and hold the reset button (on the back of the device) for about 10 seconds, or until the LED on the front becomes red. then i put the hub in include/join mode and it appeared to join. So during reset when the white light under the keys blinks off then i pressed and held the 1 key while still pressing the pinhole in the back and the green wireless light started blinking slowly. Make your Ring Alarm Gen2 keypad work like a lock keypad in SmartThings so it can work with SmartApps designed for managing locks/doors/garage doors, user codes and lots more. during pinhole pressing the green wireless light on the front flashes fast for several seconds and then flashes red for a couple of seconds. I am having one heck of a time trying to include/pair a ring keypad again.Īfter resetting it with the pinhole in the back, there is no response on the front.
0 kommentar(er)
